OEM 800mm 2000w carbon heating element

OEM 800mm 2000w carbon heating element

OEM 800mm 2000W Carbon Heating Element: Power, Dimension, and Application

We built this OEM carbon heating element for the industrial machines that need a heat source they can count on—one that’s compact and ready to work. It’s designed as a straight-in replacement for heating blocks and focused-radiation setups, where space is tight and the heat has to stay steady.

Power, Voltage, and Size: What It Really Means on the Floor

At 2000W, you get serious heat density spread across 800mm. That means you hit consistent temperatures without having to blow up your machine’s footprint. Voltage is matched to what your application needs—usually 230V or 240V, and we can spec it for 400V systems when your control gear calls for higher voltage. Going higher voltage drops the current for the same power, which eases the strain on conductors and helps keep the terminations running cooler. But here’s the trade-off: more power density means you need to plan your enclosure ventilation and thermal management carefully. Plan it right, and the machine just feels solid.

Inside the Build: Carbon Filament, Quartz Tube, No-Wobble Mounting

Inside, a carbon filament runs through a quartz tube. Carbon brings the quick heat-up, and it stays stable even when you’re cycling the heat over and over. The quartz envelope passes infrared energy cleanly and shrugs off thermal shock. And the end fittings are made for real industrial life—solid ceramics and secure clamps—so the element stays aligned and doesn’t wiggle around under vibration.

Where It Shines: Fast Response, Repeatable Heat

This is the kind of element you lean on when you need heat that responds immediately and behaves the same way every time. Think plastics processing—like PET blowing—packaging sealers, and industrial dryers. The 800mm length covers a broad area, and the 2000W output gets you to target temperature fast. We built it as an OEM-ready unit, so integration is straightforward: mount it, wire it up, and set your control parameters. Then you can get on with the work.